Notes On Operation And Troubleshooting - Boneco H300 Instrucciones De Uso

NOTES ON OPER ATION AND TROUBLESHOOTING
Problem
Air has an unpleasant odor
AUTO LED on the appliance flashes red
Appliance cannot be operated in the app. The
message "Searching ..." "Cannot be found"
appears.
No connection to the appliance
AUTO LED pulses
Current display flashes if operation is attempted
Display remains dark
Possible cause
Stagnant water in the water base
The water base is empty
Appliance is blocked by another smartphone
Bluetooth not enabled
The desired humidity has been reached
Operation is blocked
The brightness of the LEDs has been heavily reduced
in the app
Action
Drain the water base and clean the appliance and the evaporator mat
Fill the water base
Close the app on the second smartphone
Enable Bluetooth
None needed
Disable the LOCK function in the app
Increase the brightness of the LEDs in the app
21
en