Before first use, the appliance should be thoroughly cleaned, accessories coming into
contact with food also.
Clean the jug and lid: Disassemble the blades and the sealing first (refer to previous
instructions).
Use hot water or a dishwasher to clean the jug and lid (do not put the blades in the
dishwasher). You can clean the spatula, butterfly blade, blade guard, filter, measuring cup,
lid, and the steamer in the same way.
Note: When there is gunk or not easily washed into the jug or accessories, use a
special detergent for stainless steel.
Clean the blades : Hold the bottom of the blade and place underwater. You can rub the
blades with a brush.
Note: Be especially careful when cleaning the blades as they are very sharp.
Clean Steamer: You can put it in the dishwasher or use a soft cloth with a little detergent.
Clean the body of the appliance : Use a soft cloth with a little detergent. Do not use water to
prevent it from seeping into the part where the engine is.
Note: Unplug the appliance before cleaning.
Note : Should the appliance overheat, it will automatically turn itself off. A red light will
turn on an you´ll hear a ringing alarm. (Fig1). Unplug the robot and let it cool down for
about 15 minutes without food.
ENVIRONMENT
CAUTION :
Do not dispose of this product as it has with other household products. There is a
separation of this waste product into communities, you will need to inform your local
authorities about the places where you can return this product. In fact, electrical and electronic
products contain hazardous substances that have harmful effects on the environment or human
health and should be recycled. The symbol here indicates that electrical and electronic equipment
should be chosen carefully, a wheeled waste container is marked with a cross.
CLEANING
Manufactured and imported : Adeva SAS 8 rue Marc Seguin 77290 Mitry-Mory FRANCE
www.hkoenig.com - contact@hkoenig.com - Tel 01 64 67 00 01