Control Panel - H.Koenig HKM1028 Manual De Utilización

Correctly place the steamer on the jug by placing the slot of the cooker into the tab of the jug.
Press the button on the jug to lock the cooker. Place food in the cooker (arranging the foods
that require more cooking at the bottom and those who require the least above). If
necessary, the steam disc can be used.
Close the steamer with the lid so that the steam cannot escape (Fig 17).
Important :
• When you use the steamer, do not let the measuring accessory in the jug.
• When you use the steamer, ask your children to stay away from the appliance and inform
them of the danger.
• When you use the steamer, do not exceed speed 3. A speed greater than 3 may cause
food spillage.
Set the timer and select the temperature and speed on the control panel and press START /
STOP to start cooking.
Open the steamer by slightly leaning towards you so that the steam escapes through the
back and the water can flow into the container. Turn the lid and place it on the table. Then
take the steamer off and hold it above the jug for a few seconds to let the water cool and
flow. When the water stops flowing, place the steamer on its lid.
Fig 18
• Setting the timer:
Time is set with the TIME button. The maximum time for this appliance is 90 minutes.
Press the TIME button. When the pictogram TIME ▶ lights, press the + button to add time or
the - button to remove. If you keep pressing the + or - button, the time will be increased or
decreased rapidly.
Press the button once to add or remove 1 minute. Press the button two times in a row to add
or remove one second.

CONTROL PANEL

TIME : displays time
TEMP : displays temperature
SPEED : displays speed
To use the function "auto" press the AUTO button. Included: a.soup;
b.jam; c.sauce
To adjust the cooking time or the cooking temperature, use the
SELECT button and choose time or temp.
To adjust the speed of the appliance, use the SPEED button.
To work dough, use the DOUGH button.
To run the appliance at maximum speed, use the turbo button.
The + button is used to add time, increasing the temperature and /
or speed.
the - Button is used to reduce the time, reduce the temperature and
/ or the speed.
The START / STOP button is used to start and stop the appliance.