Power Linking; Dmx Linking; Dmx Connection; Master/Slave Connection - Chauvet Professional nexus Aq 5x5 Guía De Referencia Rápida

EN
AC Power

Power Linking

Power Linking
Diagram
AC Plug
Replacing the
Fuse

DMX Linking

DMX Connection

Master/Slave
Connection
This product has an auto-ranging power supply that can work with an input
voltage range of 100~240 VAC, 50/60 Hz.
You can link up to 5 Nexus™ Aq 5x5 products at 120 V, 8 products
at 208 V, or 9 products at 230 V. Never exceed this number. Power linking
cords can be purchased separately.
Connection
AC Live
AC Neutral
AC Ground
1.
Disconnect this product from power.
2.
Using a flat-head screwdriver, unscrew the fuse holder cap from the
housing.
3.
Remove blown fuse and replace with a good fuse of the same type and
rating.
4.
Screw the fuse holder cap back in place and reconnect power.
The Nexus™ Aq 5x5 will work with a DMX controller using a regular
DMX serial connection.
www.chauvetpro.com.
The Nexus™ Aq 5x5 uses a regular DMX data for its DMX personalities:
4, 6, 10, 100, and 105. See the User Manual to connect and configure for
DMX operation.
The Nexus™ Aq 5x5 uses the DMX data connection for its Master/Slave
mode. See the User Manual to connect and configure for Master/Slave
operation.
Wire (U.S.) Wire (Europe)
Black
White
Green/Yellow Green/Yellow
A DMX
3
Nexus™ Aq 5x5 QRG
Screw Color
Brown Yellow/Brass
Blue
Green
Primer is available
Silver
from