Dmx Linking - Chauvet Professional OVATION F-165WW Guía De Referencia Rápida

Ovation™ F-165WW QRG
What Is
Included
AC Power
Power Linking
AC Plug
Replacing the
Fuse

DMX Linking

DMX Connection
Master Control
Master/Slave
Connection
·
Ovation™ F-165WW
·
Neutrik® powerCON®
power cord
·
Warranty Card
This product has an auto-ranging power supply that can work with an input
voltage range of 100–240 VAC, 50/60 Hz.
To eliminate wear and improve its lifespan, during periods of non-use
completely disconnect from power via breaker or by unplugging it.
You can link up to 4 Ovation™ F-165WW products at 120 VAC or
7 at 230 VAC. Never exceed this number. Power linking cords can be
purchased separately.
Connection
AC Live
AC Neutral
AC Ground
1. Disconnect this product from power.
2. Using a Phillips #2 head screwdriver, unscrew the fuse holder cap
from the housing.
3. Remove blown fuse and replace with a good fuse of the same type and
rating.
4. Screw the fuse holder cap back in place and reconnect power.
The Ovation™ F-165WW will work with a DMX controller using a regular
DMX serial connection.
www.chauvetprofessional.com.
The Ovation™ F-165WW uses a regular DMX data connection for its
DMX personalities: UNO, DOS, and STD.P. See the User Manual to
connect and configure for DMX operation.
The Ovation™
F-165WW products using a regular DMX data connection. See the User
Manual to configure for Master Control operation.
The Ovation™ F-165WW uses the DMX data connection for its
Master/Slave mode. See the User Manual to connect and configure for
Master/Slave operation.
·
·
Wire (U.S.)
Black
White
Green/Yellow
A DMX
F-165WW allows
3
Gel frame
(7.5 in/191 mm accessories)
Quick Reference Guide
Wire (Europe)
Brown
Blue
Green/Yellow
Primer is available
control of other
EN
Screw Color
Yellow/Brass
Silver
Green
from
Ovation™