Sauder 422194 Instrucciones De Manejo página 28

Step 23
1
D28
Groove
Insert the LARGE DRAWER SIDES (D28 and D29)
å
at an angle into the slot at each end of the LARGE
DRAWER FRONT (L).
3
Be sure the
DRAWER
BOTTOM
inserts into
the DRAWER
BACK groove.
Fasten the LARGE DRAWER BACK (D78) to the LARGE DRAWER SIDES (D28 and D29). Use four BLACK 1-9/16" FLAT
å
HEAD SCREWS (30S).
NOTE: Be sure the DRAWER BOTTOM (D707) inserts into the groove of the LARGE DRAWER BACK (D78).
å
Page 28
The tabs should insert freely
into the slots. Gently tilt the
DRAWER SIDES side to side
until the tabs slip into the slots.
D29
L
D28
D707
VIEW THE T-LOCK BOX VIDEO
2
Be sure the DRAWER
BOTTOM inserts into the
DRAWER FRONT groove.
Slide the DRAWER BOTTOM (D707 ) into the grooves in the
å
LARGE DRAWER SIDES (D28 and D29) and LARGE
DRAWER FRONT (L).
D78
D29
422194
With the palm of your
hand, tap the DRAWER
BOTTOM down into
the groove.
U n
fi n
s u i s h
r f a
e d
c e
D707
D28
D29
L
Start each screw a few turns before
completely tightening any of them.
30S
BLACK 1-9/16" FLAT HEAD SCREW
(4 used in this step)
www.sauder.com/services