Sauder 422194 Instrucciones De Manejo página 34

Step 29
Push the RUBBER SLEEVES (2R) over the METAL
å
PINS (1R). Insert the METAL PINS into the hole locations of
your choice in the UPRIGHT (C) and LOWER UPRIGHT (I).
Set the ADJUSTABLE SHELF (J) onto the METAL PINS.
To insert the small drawer into your unit, tip the front
å
of the drawer down and drop the rollers on the drawer
behind the rollers on the unit. Lift the front of the drawer
up and slide it into the unit.
To insert the fi le drawer into your unit, line up the
å
EXTENSION SLIDES on the drawer with the EXTENSION
RAILS on the unit and push the drawer into the unit until
the drawer is fully inserted. The drawer will push in hard
until it is all the way in, then it will slide in and out easier.
Page 34
60 lbs.
C
25 lbs.
J
15 lbs.
422194
25 lbs.
15 lbs.
I
20 lbs.
1R
(4 used)
2R
25 lbs.
Place the roller on the SLIDE
behind the roller on the RAIL.
www.sauder.com/services