Zipper Application - Baby Lock Anna A-LINE Serie Guía De Instrucciones

Tabla de contenido

Publicidad

q
w
q
(A)
z
x

Zipper Application

e
Machine setting
q Stitch pattern: A
w Stitch length:
e Thread tension: 3 – 6
r Presser foot:
r
Attaching the zipper foot
A: To sew the left side of the zipper, attach
B: To sew the right side of zipper, attach the
w
(B)
To sew
Attach zipper foot with the right side pin.
z Fold under back seam allowance of garment.
Raise and release presser foot, and reattach it
with the left side pin.
x Close zipper and pin folded edge of front
48
1.5 – 4
Zipper foot E
zipper foot with the right side pin.
zipper foot with the left side pin.
q Groove
w Pin
Pin or baste zipper tape to under side of seam
allowance. Guide the edge of the zipper foot
along the zipper teeth and stitch through the
garment and zipper tape. See illustration.
seam allowance along the first stitching.
Start to sew just below zipper bottom stop,
stitching across fabric about 3/8" (1cm).
Turn fabric 90 degrees and sew up the length
of the zipper tape.
Before reaching the slider, stop machine with
needle in fabric and raise the foot.
Move the zipper slider down a few inches to
clear a path for stitching.
At the end of the seam, sew a few stitches in
reverse to lock the stitching.

Publicidad

Tabla de contenido
loading

Este manual también es adecuado para:

Anna bl20a

Tabla de contenido