Maintenance; General Service; Replacing The Battery - Surtek 111005 Manual De Usuario

MAINTENANCE

This section provides basic maintenance information
including battery replacement instruction.
Do not attempt to repair or service your Meter
unless you are qualified to do so and have the
relevant calibration, performance test, and service
information. To avoid electrical shock or damage to
the Meter, do you get water inside the case.
A.

General Service

• Periodically wipe the case with a damp cloth and mild
detergent. Do not use abrasives or solvents.
• To clean the terminals with cotton bar with detergent, as dirt
or moisture in the terminals can affect readings.
• Turn the Meter power off when it is not in use.
• Take out the battery when it is not using for a long time.
• Do not use or store the Meter in a place of humidity, high
temperature, explosive, inflammable and strong magnetic
field.
B.

Replacing the Battery

To avoid false readings, which could lead to possible
electric shock or personal injury, replace the battery
as soon as the battery indicator " " appears. Make
sure the transformer jaw and the tets leads are
disconected from the circuit being tested before
To replace the battery:
1. Turn the rotary switch of the Meter to OFF position and
remove all the connections from the terminals. 2. Remove the
screw from the battery compartment, and separate the battery
compartment from the case bottom.
3. Remove the battery from the battery compartment.
4. Replace the battery with a new 9V battery (NEDA1604, 6F22
or 006P) and or a 1.5V battery (AAA). 5. Rejoin the case bottom
and battery compartment, and reinstall the screw.
Warning
Warning
opening the case bottom.
E N G L I S H
45