Descargar Imprimir esta página

LEGRAND 672 43 Manual Del Usuario página 14

Publicidad

Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 19
Touch Control
How to clean your control
In order to clean the device, it is possible to temporarily disconnect the
sensitive areas by simultaneously pressing two end areas (see picture).
The LEDs begin to flash sequentially; it is now possible to use a cloth
on the surface of the control without sending any command to the
system.
Normal functioning is restored after 10 seconds if nothing is touched.
Do not clean with solvents, thinners etc. or abrasive products.
14
14

Publicidad

loading

Este manual también es adecuado para:

672 44672 45672 46672 47672 48