Installation and Operation Guide
Interface Module WEG MIW-02
I. GENERAL INFORMATION
This Manual describes how to install, start-up, operate and identify problems with this
equipment.
1. MIW-02
Interface Module for RS-232/RS-485 communication of WEG equipment (drivers and
soft-starters). MIW-02 permits the interconnection of WEG equipment that have the
RS-232 serial interface only in RS-485 serial communication network.
2. SPECIFICATIONS TECHNIQUES
2.1 Mechanical Characteristics
- Made of galvanized steel sheets can be fastened through bolts directly on the panel or
other suitable surface;
- Grounding through the fastening bolt.
WEG Network
RS-485 XC29
MIW-02
RS-232
XC1
RS-232
RS-232 XC..
Equipment
Figure 1: Function of the MIW-02
Fastening M5
POW
SER
RS-485
RS-232
50,5mm
Figure 2: Dimensions of the MIW-02
RS-485
66mm
1