Sauder Queen Platform Bed 414866 Instrucciones De Manejo página 9

Step 5
Fasten two EXTENSION RAILS (U) to the UPRIGHTS (H and I).
å
Use four GOLD 5/16" FLAT HEAD SCREWS (3S).
NOTE: For each EXTENSION RAIL, turn a SCREW into the hole
å
shown in the enlarged diagram. Then, slide the inner cartridge
of the EXTENSION RAIL in to fi nd the other hole that lines up
with the hole in the UPRIGHTS. Turn a SCREW into this hole.
Use the upper diagram if you are
putting the DRAWERS on the left.
Open end
Use the lower diagram if you are
putting the DRAWERS on the right.
Open end
www.sauder.com/services
U
H
U
I
414866
GOLD 5/16" FLAT HEAD SCREW
(4 used in this step)
U
I
U
H
3S
Open end
Open end
Page 9