Pattern Selector Dial; Selecting Stretch Stitch Patterns; Stitch Length Dial - Baby Lock Natalie A-LINE Serie Guía De Instalación Y Referencia

•
4
0 1 2 3
•
34
+ S.S. -
• •
•

• Pattern Selector Dial

Raise the needle above the fabric and match the
desired pattern with the setting mark by turning
the pattern selector dial.

• Selecting Stretch Stitch Patterns

When sewing stretch stitch, set the stitch length
dial at " S.S. "

• Stitch Length Dial

• Place the desired number at the setting mark by
turning the stitch length dial.
• The higher the number, the longer the stitch
length.
• " " is the correct setting for buttonhole stitching.
• Adjust the stitch length dial in the 0.3 to 4 range
when you sew the zigzag stitch.
• Place S.S. at the setting mark to sew the stretch
stitch pattern correctly.
• If forward and reverse feeding becomes
unbalanced due to the type of fabric, adjust the
balance as follows:
If patterns are compressed, turn the dial toward
" + ".
If patterns are drawn out, turn the dial toward " – ".