Note
Valve terminal type VTSA-ASI-...-4E4A-Z contains an
AS-Interface slave.
– Permitted address range: 1 ... 31
(Factory setting: 0).
– It is not necessary to parametrize the AS-Interface
slave.
Address the valve terminal at the plug "AS-i In"
(see section 3.6).
The diagram below shows the assignment of the data bits
to the inputs and outputs of the slave:
Data bits:
Inputs:
Outputs:
(solenoid coils)
I/O = Bidirectional (B)
The address mapping depends on the configuration of the
master.
Festo VTSA-ASI-...-4E4A-Z 1108a English
Slave: IO code 7
D0 D1 D2 D3
I/O I/O I/O I/O
I0
I1
I2
I3
O0 O1 O2 O3
H
23