Setting Night/Sleeping Mode; Switching Between Fahrenheit And Celsius - Veridian Healthcare 09-348 Manual De Instrucciones

SETTING NIGHT/SLEEPING
MODE NO AUDIO BEEPING
Night Mode is a convenient way to conduct
measurements without an audible beep
indicating the thermometer has powered on or a
measurement is complete.
To toggle between modes:
1. Press the MEASURE button to turn the
thermometer on. The device will default to the
last mode used.
2. Press and release the MODE button to toggle
through the four measurement options.
SWITCHING BETWEEN ºF / ºC
Your thermometer can display results in either
degrees Fahrenheit (°F) or degrees Celsius (°C).
To switch between Fahrenheit and Celsius, while
the unit is on press and hold both the MEM and
the MODE buttons until the °F icon on the display
switches to the °C icon, or vise versa, at which
time the mode has been changed and you may
release the buttons.
ENGLISH • 11