Manual Mode - BH FITNESS G6130 Manual De Instrucciones

ELEMENTS OF THE MONITOR.-
A: These 3
continuous readout
Elevation/Pulse rate; Time; Speed and
Distance.
B: The electronic monitor has 8 push
buttons or keys; INCLINE (▲▼);
START; PROGRAM; MODE; SPEED
Km/h (▲▼); STOP.
g: Safety key.
STARTING.-
Plug the unit into a wall socket with an
EARTH terminal and set switch (L) to
position (1), Fig.1.
The safety key (g) must be inserted
into its spot (E) Fig.2, otherwise the
machine will not operate. As soon as
the safety key (g) is in place, the
machine will beep and all of the
displays will show a [00:00] value,
indicating that the machine is READY
to be used.
displays provide
of Calories;
English
CHANGING FROM
a KILOMETRES TO MILES.-
This machine has the option to display
speed in km/h or mph. The factory
setting for the machine is km/h.
To change from km/h to mph follow
these steps:
Unplug the machine from the mains
supply, remove the safety key. Plug
the machine back in and insert the
safety key (g) into its slot.
Press and hold the INCLINE▲ and
SPEED▲ keys at the same time for 5
approximately seconds. The speed
display will show the number 0.6, the
said number corresponds to miles per
hour.
OPERATING INSTRUCTIONS.-

MANUAL MODE

Pressing the START key will light the
MANUAL and the machine will start
within
countdown on the TIME display, at a
speed of 1.0km/h.
9
3 seconds, shown by a