For Your Safety - Flex ADM1 Instrucciones De Funcionamiento

Operating instructions
Contents

For your safety . . . . . . . . . . . . . . . . . . . . 13

Overview . . . . . . . . . . . . . . . . . . . . . . . . 15
Technical specifications . . . . . . . . . . . . . 16
Operating instructions . . . . . . . . . . . . . . 16
Maintenance and care . . . . . . . . . . . . . . 21
Disposal information . . . . . . . . . . . . . . . . 21
CE Declaration of Conformity . . . . . . . . . 22
Guarantee . . . . . . . . . . . . . . . . . . . . . . . 22
For your safety
Before using the power tool, read and follow:
– these operating instructions,
– the currently valid site rules and the
regulations for the prevention of
accidents.
This power tool is state of the art and has
been constructed in accordance with the
acknowledged safety regulations.
The power tool may be operated only if it is
– used as intended,
– in perfect working order.
Faults which impair safety must be repaired
immediately.
Symbols used in this manual
(ERKIV
(IRSXIW MQTIRHMRK HERKIV 2SRSFWIVZERGI
SJ XLMW [EVRMRK QE] VIWYPX MR HIEXL SV
I\XVIQIP] WIZIVI MRNYVMIW
'EYXMSR
(IRSXIW E TSWWMFP] HERKIVSYW WMXYEXMSR 2SR
SFWIVZERGI SJ XLMW [EVRMRK QE] VIWYPX MR WPMKLX
MRNYV] SV HEQEKI XS TVSTIVX]
2SXI
(IRSXIW ETTPMGEXMSR XMTW ERH MQTSVXERX
MRJSVQEXMSR
Symbols on the power tool
Before switching on the power
tool, read the operating manual!
Disposal information for the old
power tool! (See page 21)
LASER RADIATION
DO NOT STARE
INTO THE BEAM.
Class 2 laser
Max. Output power
< 1 mW
@ 635–665nm
Class 2 laser
DIN EN 60825-1:2003-10
Laser classification
The power tool conforms to a class 2 laser
based on the standard DIN EN 60825-
1:2003-10.
Eyes must be protected with the eyelid close
reflex in case you accidentally glance into the
laser beam. However, this eyelid protective
reflex may be impaired by medication, alcohol
or drugs. These power tools may be used
without other protective measures.
Nevertheless, you should not look directly
into the light source, just as you would not
look directly at the sun. Do not aim the laser
beam at people.
A laser beam may be the ignition source
for potentially explosive atmospheres and
flammable substances.
Intended use
This laser range finder is designed for
commercial use in industry and trade.
The device is designed for
– measuring distances within the range of
0.30–45.0 m;
– calculating lengths (addition, subtraction,
indirect distance measurement), areas
and volumes.
Laser radiation
Do not stare into the
beam.
Class 2 laser
Max. Output power
<1 mW @ 635–665 nm
Class 2 laser.
DIN EN 60825-1:2003-10
13