Main Depuro Pro Parts; Chassis; Fan; Filter - Vortice DEPURO PRO 150 Manual De Instrucciones

3.2.1. CHASSIS:

Soundproofed 30mm extruded aluminum profile, nylon corners and pre lacquered steel sandwich panels,
•
RAL 9006, class M0, with 25mm internal rockwool insulation class A1 (non-combustible) and 90Kg/m3
density. Panels come with quick release fastening system for easy assembly and disassembly whenever
required, whether for cleaning, maintenance or panel repositioning.
Filters are located in the perforated side panels, with handles and fastening system. This ease of access
•
optimizes maintenance and filter replacement procedures. Filter replacement and manipulation of the
DEPURO PRO is recommended with the appropriate PPE's. See section 7. EQUIPMENT MAINTEANACE on
to change the filters and their correct and safe handling.
DEPURO PRO purifiers are equipped with 4 wheels with brakes on the base for ease of mobility throughout
•
the interior spaces. The wheel set is included with the product, these need to be fixed to the body of the unit
on the aluminum supports before use.

3.2.2. FAN:

• Equipped with high efficiency single inlet – self cleaning backward curved impeller, made of polyamide,
statically and dynamically balanced at the factory
3.2.3. FILTERS:
The DEPURO PRO is equipped with a two stage filtering at each air intake; 4 filters in total are included 2
un +2 un:
2 un x ISO COARSE 65% (old G4) Pre-filter stage to protect from dust and dirt and
improve the shelf life of the main or absolute filter
2 un x HEPA H14 Main filtering stage of high or absolute efficiency

3.2.4. MOTORS:

-The DEPURO PRO 150 and DEPURO PRO 300 are equipped with a low consumption EC (electronically
commutated) exterior rotor motor. IP-44 protection and class B insulation. Standard voltage 230V 50Hz/60Hz

3.2.5. CONTROL PANEL:

• All DEPURO PRO air purifiers are equipped with a master control panel located in the upper part of the
structure.
42