4-Operation And Comissioning; Depuro Pro General Operation - Vortice DEPURO PRO 150 Manual De Instrucciones

4. OPERATION AND COMISSIONING

4.1 DEPURO PRO GENERAL OPERATION:

The DEPURO PRO has a simple and intuitive operation to facilitate users and installers operation and maintenance of
the unit.
In general, the DEPURO PRO intakes contaminated air from the two upper sides of the DEPURO PRO. Once the air is
cleaned and purified through the filters, it is delivered to the bottom of the unit and and returned to the room.(see Fig. 2)
To operate the DEPURO PRO it first needs to be connected to the electrical supply (generally 230V / 50Hz but it can
also operate at 60Hz).
The DEPURO PRO is operated by means on the onboard control panel* that allows set up and control of
the following parameters:
1. On/Off of the air Purifier.
2. Automatic function – Autonomous.
3. Flow adjustment, 0 being the lowest and 100 the highest.
4. Schedule control for night mode optimization and thus favoring low energy consumption when the
interior spaces are empty.
5. Clogged filter alarm and maintenance indication. This alarm can be programmed for
hours of operation (See specific Regulator manual attached to the equipment).
*
For more details and the specific control operation, consult the Regulator Emanual enclosed with
the equipment.(REG DEPURO)
Fig.2
43