Led Indicators - D-Link DES-1016A Guía De Instalación Rápida

Connecting the DES-1016A 10/100 Mbps Fast Ethernet
Switch to Your Network
A. Power:
Power is supplied through an external DC power adapter. Check the technical
speciication section for information about the DC power input voltage. Since the
DES-1016A does not include a power button, plugging its power adapter into a power
outlet will immediately power it on.
B. Fast Ethernet Ports:
These ports support network speeds of either 10 Mbps or 100 Mbps, and can operate
in half- and full- duplex transfer modes. These ports also support automatic MDI/MDIX
crossover detection, which gives the Switch true, "plug and play" capabilities. Just
connect any network cable between the Switch and the device, and The Switch will
automatically detect the settings of the device and adjust itself accordingly.

LED Indicators

A. Power Indicator
This green indicator light is on when the Switch is receiving power; otherwise, it is off.
B. Link/Act
This LED indicator light is green when the port is connected to a device. The green
indicator blinks as data is transmitted or received.
DES-1016A
DES-1016A
DES-1016A
3