Autoscan Mode; Specifications - Tripp-Lite B034-002-R Manual De Usuario

Note: The LED on the top of the KVM will illuminate
in green to indicate which port has been selected.

AutoScan Mode:

The AutoScan feature allows you to monitor the activity
of the connected computers at regular 10 second inter-
vals without having to take the trouble of switching
ports yourself.
To invoke AutoScan Mode press the "NUM LOCK" key
four times within two seconds.
"[NUM LOCK], [NUM LOCK],
[NUM LOCK], [NUM LOCK]"
Note: 1. The interval between these two keys should be
no more than 0.5 seconds. Once the scanning begins, it
continues until you press "NUM LOCK" twice to exit
AutoScan Mode. 2. The flashing LED on the top of the
unit indicates that the connected computer is currently
in the AutoScan mode. To exit the AutoScan Mode
press the "NUM LOCK" key twice within two seconds.
6

Specifications

Computer Connections:
Keyboard / Mouse
Monitor
Speakers
Microphone
Console Connections:
Keyboard
Mouse
Monitor
Speakers
Microphone
Port LEDs
Switching
Scan Interval
Resolution
Dimensions (W x D x H)
Weight
Operating Temp
Storage Temp
Humidity
Warranty
2 sets: USB A-type
2 sets: HB15 Male
2 sets: 3.5mm Male
2 sets: 3.5mm Male
USB A-type
USB A-type
HB15 Female
3.5mm Female
3.5mm Female
2
Hotkeys
10 Seconds
1920 x 1440 @75Hz
3in. x 4in. x 1in.
1lb
32° to 104° F
-4° to 140° F
0 - 80% RH, non-condensing
1 Year
7