Warranty; Maintenance; Unpacking - Repacking - Metrix MX 350 Manual De Instrucciones

1.2. Warranty

This equipment is guaranteed against any material or
manufacturing defects, in accordance with the general
conditions of sale.
During the warranty period (1 year), the instrument
can only be repaired by the manufacturer, who
reserves the right to repair the instrument or to
exchange all or part of it. If the equipment is returned
to the manufacturer, the outgoing transport costs are
borne by the customer.
The warranty is not applicable in the following cases:
1. improper use of the equipment or use of it in con-
junction with incompatible equipment;
2. modifications to the equipment without the explicit
authorisation of the manufacturer's technical
depart-ment;
3. work carried out on the instrument by a person not
approved by the manufacturer;
4. adaptation for a specific application, not included
in the definition of the equipment or the user's
manual;
5. knocks, falls or flooding.
The contents of this manual must not be reproduced
in any form without our consent.

1.3. Maintenance

Return your instrument to your distributor for any work
to be done within or outside the guarantee.

1.4. Unpacking - Repacking

All the equipment was checked mechanically and
electronically before shipment. Every precaution was
taken to ensure that you receive the instrument
undamaged. It is a good idea to check quickly to
detect any damage that may have occurred during
transport. If there is any damage, immediately notify
the transporter of the customary reservations.
Caution! If you ship this instrument on elsewhere, use
preferably the original packaging and indicate the reasons
for reshipment as clearly as possible in a note enclosed
with the equipment.
Our products are patented in FRANCE and ABROAD. Our
logos are registered trade marks.
We reserve the right to modify the characteristics and
prices should technological advances make it necessary.
20
Chapter II
MX 350 / MX 355