Troubleshooting; Technical Data; Warranty And Service - Silvercrest SKMP 1300 B3 Instrucciones De Uso

Troubleshooting

If the appliance suddenly stops working:
■ The appliance has overheated and triggered
the automatic safety cut-out .
–
Turn the rotary switch 3 to 0 .
–
Remove the plug from the wall socket .
–
Allow the appliance to cool for 15 minutes .
–
If the appliance has not yet cooled off com-
pletely after 15 minutes, it will not start .
–
Wait a further 15 minutes and try switching
on again .
If the appliance cannot be switched on:
–
Check that the plug is correctly connected
to a wall socket .
–
Make sure that the swivelling arm 1 has
clicked into place in the right position .

Technical data

Input voltage:
Power consumption:
Protection class:
Max . capacity
Mixing bowl 6:
Blender t:
All of the parts of this appliance that come
into contact with food are food-safe .
We recommend the following operating times:
When working with kneading hooks 0, whisk q
or beater w, allow the appliance to cool down
after 10 minutes of operation .
When working with the blender t, allow the ap-
pliance to cool down after 3 minutes of operation .
If you exceed these operating times, the device can
overheat and be damaged!
SKMP 1300 B3
220 - 240 V ~ / 50 Hz
1300 W
II
approx . 6 .3 l
approx . 1 .5 l

Warranty and service

This appliance is provided with a 3-year warranty
valid from the date of purchase. This appliance
has been manufactured with care and inspected
meticulously prior to delivery. Please retain your
receipt as proof of purchase. In the event of a
warranty claim, please contact your Customer
Service unit by telephone. This is the only way
to guarantee free return of your goods.
The warranty only covers claims for material and
manufacturing defects, not for damage sustained
during carriage, components subject to wear and
tear or damage to fragile components such as
switches or batteries . This appliance is intended
solely for private use and not for commercial
purposes .
The warranty shall be deemed void in cases of
misuse or improper handling, use of force and
modifications/repairs which have not been carried
out by one of our authorised Service centres .
Your statutory rights are not restricted by this
warranty .
The warranty period is not prolonged by repairs
effected under the warranty . This also applies to
replaced and repaired components . Any damage
and defects present at the time of purchase must be
reported immediately after unpacking, but no later
than two days after the date of purchase . Repairs
carried out after expiry of the warranty period shall
be subject to charge .
Service Great Britain
Tel .: 0871 5000 720 (£ 0 .10/Min .)
E-Mail: kompernass@lidl .co .uk
IAN 276995/276996/277709
Service Malta
Tel .: 80062230
E-Mail: kompernass@lidl .com .mt
IAN 276995/276996/277709
GB │ MT │ 59 ■