Technical Features - Riello Burners GS10 Instrucciones Para La Instalación, Uso Y Mantenimiento

Forced draught gas burner

TECHNICAL FEATURES

Thermal output
Net heat value
Gas
(Family 2)
Pressure
Electrical supply
Motor
Capacitor
Ignition transformer
Absorbed electrical power
For gas family 3 (LPG) ask for separate kit.
COUNTRY
GAS CATEGORY
The burner meets protection level of IP 40, EN 60529.
CE marking according to Gas Appliance Directive 90/396/EEC; PIN 0063AP6680.
According to directives: EMC 89/336/EEC, Low Voltage 73/23/EEC, Machines 98/37/EEC and
Efficiency 92/42/EEC.
Gas train according to EN 676.
1 – Air-dampers
2 – Screws for fixing the air-damper
3 – 7 pole socket for electrical supply
and control
4 – 6 pole socket for gas train
5 – Grommet
6 – Screw for fixing the cover
7 – Lock-out lamp and reset button
NOTE
The grommet (5) and the screw for fixing the cover (6) supplied with the burner, must be fitted to
the same side of the gas train.
2425
GS10
CODE
42 – 116 kW
8 – 12 kWh/m
min. 10 mbar
single phase, 230 V ± 10%
230 V / 0.7 A
2 µ F
primary 230 V / 1.8 A – secondary 8 kV / 30 mA
0.13 kW
IT - AT - GR - DK - SE
II2H3B/P
7
6
3755417
– 36,000 – 100,000 kcal/h
3
– 7,000 – 10,340 kcal/m
– max. 35 mbar
~
GB - IE
II2H3P
Fig. 1
4
5
1
GB
554T1
TYPE
3
50Hz
DE LU
II2ELL3B/P II2E3B/P
3
D5168
1
2
2