Quick Guide For Menu Operation - Hitachi LE55G508 Manual Del Usuario

CH
/
Press and release CH
next channel.
For proper operation, before selecting channels, they should be
set into the memory. See "Channels setup" on page 18.
INFO/
Press INFO to display the current information on the screen.
When the TV receives a digital signal, the digital information will
appear.
• Channel number
• Channel label (if preset)
• Parental Control
• Program guide
• Resolution
Press INFO again to clear the display.
LAST CH
This button allows you to go back to the last channel selected by
pressing LAST CH. Press LAST CH again to return to the channel
you were watching.
MUTE
Press MUTE to switch off the sound. The TV's sound will be
silenced and MUTE icon will appear on the screen. The sound can
be switched back on by pressing this button again or by pressing
the VOL (VOLUME ) + button.
EN 14
/ . The TV automatically stops at the
• DTV Signal condition
• Broadcast program name
• Signal Type
• Current date and time
• Audio language
Quick guide for menu
operation
Example: Select Menu Language.
1
Press INPUT to select TV mode.
2
Press MENU. The TV menu screen will appear.
3
Press ◀ or ▶ to select "Setup", then press SELECT.
4
Press ▲ or ▼ to select "Menu Language", then press
SELECT.
5
Press ▲ or ▼ to select desired language.
6
Press EXIT to return to the normal screen.
NOTE:
• On the following pages, the menu can be called in the same way
described above, by pressing the MENU button.
• If no buttons are pressed for more than about 30 seconds, the
TV will return to normal viewing automatically.
• During TV or external input mode (except PC input mode), if
there is no signal reception, the TV will change to standby after
approx. 15 minutes (in PC input mode: 1 minute).