Proxxon WP/E Manual página 9

3 Scope of delivery:
1 x WP/E Angle Polisher
1 x Operating instructions and safety guidelines
1 x Rubber backing disc with touch fastener
1 x Lambskin polishing disc
1 x Polishing felt
12 x Grinding wheels (K 2000)
75 ml Polishing emulsion
1 x Microfibre cloth
4 Technical data:
Motor:
Voltage:
Power:
Device:
Length:
Weight
(incl. connecting cable):
Spindle velocity:
Maximum polishing tool
diameter:
Noise development:
Use only in dry rooms
Protection class II device
Please do not dispose of this electrical
machine in household refuse!
The following polishing tools are included in the scope of delivery of the WP/E angle polisher:
1 x Polishing sponge
(blue=medium
hard, Article 28662)
1 x Lambskin polishing
hood
(Article 28664)
1 x Polishing felt disc,
medium hard
(Article 28666)
12 x Super-fine grinding
disc, 2000 grit
(Article 28670)
A microfibre cloth (Article 28678) is also included with the WP/E for final cleaning of polished surfaces.
220 - 240 V, 50/60 Hz, ~
100 Watt
approx. 260 mm
approx. 880 gr.
800-2500 rpm
50 mm
< 70 dB(A)
For applying polishing emulsion to paint and metal surfaces and
subsequent polishing. With touch fastener.
Ø 50 x 25 mm.
Made of high-quality, thick lambskin for polishing scratchproof
paints. With touch fastener. Ø 50 mm.
For polishing metals (e.g. stainless steel, brass and copper).
With touch fastener.
Made of silicon carbide. For finishing of paint surfaces, removing
paint drips and inclusions. With touch fastener. Ø 50 mm.
For your safety, always wear hearing
protection while working!
5 Commissioning
Your WP/E angle polisher is delivered ready for use and,
except for the fitting of polishing tools to the rubber
backing disc, no special commissioning measures need
to be taken.
However, please check the device and the polishing tools
for any visible wear before every use!
Always ensure your own safety!
Despite its compact size, the WP/E angle polisher is an
electric tool that harbours a certain level of risk. Always
ensure that the mains plug is disconnected when check-
ing the device, during cleaning or when changing pol-
ishing tools!
5.1 Rubber backing disc with quick-action touch
fastener (Fig. 2)
Polishing tools 1 (e.g. the polishing sponge or felt disc)
are fixed to the rubber backing disc 3 with the touch fas-
tener 2. Rapid and safe changing of polishing tools
therefore poses no problem when adjusting to different
materials or machining stages. When changing a pol-
ishing tool, simply pull of the tool and press on the
replacement!
- 9 -