Wiseup DVR-0031-4 Guia Del Usuario página 5

4.2. Remote View Setup (WAN Mode)
>> Before remote view setup, please make sure that the camera is successfully added to
the APP and it's online in the P2P (LAN) mode.
4.2.1. Launch the "BVCAM" APP.
4.2.2. Set up remote view function as below:
Step 1: Tap the setting icon on the "Live video" page then choose "Advance Config" or
"Device Settings".
Step 2: Go to "WIFI Config" page and select a desired WIFI hotspot to enroll the camera in.
Step 3: Tap "OK" to complete the remote view setup and the camera will reboot automatically.