Display And Keys Description - SOLVO VALLÉS FH Serie Manual De Utilización

Install the External Facilities
Turn off the balance before connect it or disconnectit with external facilities £such as
the printer or the computer)
Warm-up Time
To assure the measure accuracy, the balance must be warmed up for 30 minutes
before normal operation.

DISPLAY AND KEYS DESCRIPTION

3
1. Count sign
3. Stability sign
Connect the Power Adapter
Only the power adapter offered by us is allowed.
- Connect the power adapter to the balance
- Connect the power adapter to the power socket
Adjust the Level GaugePurpose:
- Adjust the level guage of the balance.
The level guage needs to be adjusted once its place
is changed.The two front bottom bolts are used to
adjust the level guage.
- Spin the two bolts as shown in the figure until the
bubble in the level gauge is in the ceter of the circle.
- Normally, it needs to be adjusted repeatedly.
1 2
2. Weighing units
4. Level gauge
4
7