Festo YSRWJ-A Serie Instrucciones De Utilizacion página 16

YSRWJ-...-A
Using the YSRWJ-... as a fixed stop
Please note
Too high impact forces will damage the positioning element.
Make sure that the max. permitted impact force is not exceeded
(see Technical specifications).
Please note
Masses which strike the positioning
element at an angle will damage it.
Make sure that the cushioning energy:
is always applied vertically, if possible at
the point of mass centre of gravity.
Fitting electric components
Using proximity switches
S
Place the proximity switches in the groove
5 of the positioning element (see Fig. 8).
S
Fasten the proximity switches in the end
positions.
The integrated magnet (M) serves for
interrogating the position of the shock
absorber.
16
Fig. 7
Fig. 8
Fig. 9
Festo YSRWJ-...-A 0008NH English
5
(M)