Humidifier Performance - ResMed S9 VPAP Auto Manual De Instrucciones

Air tubing technical specifications
Air tubing
ClimateLine heated air tubing
MAX
ClimateLine heated air
tubing
SlimLine air tubing
Standard air tubing
3 m air tubing
Heated air tubing temperature cut-out: ≤ 106°F (≤ 41°C)
Notes:
• The manufacturer reserves the right to change these specifications without notice.
• The temperature and relative humidity settings displayed for Climate Control are not measured
values.
• Check with your clinician/service provider before using the SlimLine air tubing with devices other
than the S9 or H5i.
• The electrical connector end of the heated air tubing is only compatible with the H5i air outlet and
should not be fitted to the device or mask.

Humidifier performance

The following settings have been tested at 71.6°F (22°C) ambient temperature:
Mask pressure
cm H O
2
3
10
20
25
a. AH - Absolute Humidity in mg/L.
b. BTPS - Body Temperature Pressure Saturated.
10
Material
Flexible plastic and electrical
components
Flexible plastic and electrical
components
Flexible plastic
Flexible plastic
Flexible plastic
RH output %
Setting 3 Setting 6
90
95
95
100
Length
6'6" (2 m)
6'3" (1.9 m)
6' (1.8 m)
6'6" (2.0 m)
9'10" (3.0 m)
Nominal system output AH
Setting 3
100
100 11.5
100
100
Inner diameter
0.6" (15 mm)
0.75" (19 mm)
0.6" (15 mm)
0.75" (19 mm)
0.75" (19 mm)
Setting 6
10 18
21
11 18
12 13.5
a b
, BTPS