Humidifier Performance - ResMed AirCurve 10 ASV Guía De Usuario

FCC ID: 2ACHL-AIR104G, 2ACHL-AIR103G
IC: 9103A-AIR104G, 9103A-AIR103G
The AirCurve 10 device complies with FCC Rules and Industry Canada rules.
The AirCurve 10 device should be used at a minimum distance of 0.8" (2 cm) from the body during operation.
Additional information regarding the FCC Rules and IC compliance for this device can be found on
www.resmed.com/downloads/devices
Operating pressure range
ASV, ASVAuto:
CPAP
Supplemental Oxygen
Maximum flow:
Pneumatic flow path
Design life
Device, power supply unit:
Cleanable water tub:
Standard water tub, air tubing:
General
The patient is an intended operator.

Humidifier performance

Mask Pressure
cm H O
2
3
4
10
20
25
1
AH - Absolute Humidity in mg/L
2
BTPS - Body Temperature Pressure Saturated
18
RH output % at
63°F (17°C) ambient
temperature
Setting 4
85
85
85
85
85
4 to 25 cm H
4 to 20 cm H
15 L/min (CPAP, ASV); 4 L/min (ASVAuto)
1. Flow sensor
2. Blower
3. Pressure sensor
4. Mask
5. Air tubing
6. Water tub
7. Device
8. Inlet filter
5 years
2.5 years
6 months
RH output % at
72°F (22°C) ambient
temperature
Setting 8
100
100
100
90
90
O
2
O
2
Nominal system output AH
Setting 4
6
6
6
6
6
1 , BTPS 2
Setting 8
>10
>10
>10
>10
>10