Care And Cleaning; Stainless Steel Surfaces - Thermador VCI 230 DS Guía De Uso Y Cuidado

WARNING: To avoid risk of fire and explosion, do not use flammable liquids or solvents.
Always unplug or disconnect the appliance from the power supply before servicing.
IMPORTANT: Do not clean the hood with abrasive
sponges or with cleaning agents that contain sand,
baking soda, acid or chlorine!
K Clean the hood with a hot soap solution or a mild
window cleaner.
K Do not scrape off dried-on dirt. Wipe off with a damp
cloth instead.

CARE AND CLEANING

PAGE 6
K When cleaning the grease filters, remove grease
deposits from accessible parts of the housing.
This prevents the risk of fire and ensures that the hood
continues operating at maximum efficiency.
K Note: Do not use alcohol (spirits), as dull marks may
appear.
Caution: Follow all instructions and precautions
provided with cleaners.
IMPORTANT: Clean the operating buttons with a mild
soapy solution and a soft, damp cloth only.
Do not use stainless steel cleaners to clean the operating
buttons.

Stainless steel surfaces:

K Use a mild non-abrasive stainless steel cleaner.
K Clean the surface in the same direction as the grain.
K We recommend stainless steel cleaners, such as
Fantastik ® or Formula 409
towel.
Aluminum and plastic surfaces:
K Do not use dry cloths.
K Use a mild window cleaning agent.
K Do not use aggressive, acidic or abrasive cleaners.
Observe the warranty regulations in the enclosed
service booklet.
® sprayed onto a paper