Replacing The Bulbs; Customer Service; Before Calling For Service; How To Obtain Service - Thermador VCI 230 DS Guía De Uso Y Cuidado

CAUTION: Avoid risk of electric shock.
1. Switch off the hood and unplug the power cord, or
switch off the electrical power supply at the main fuse
box.
CAUTION: Avoid risk of burns.
Halogen bulbs become very hot and remain hot for some
time after being switched off.
2. Remove the bulb ring with a screwdriver or similar tool.

Before Calling for Service

If the blower does not operate:
K Ensure that the electrical cord is properly connected and that power is supplied to the electrical circuit.
K Make sure that the blower speed control knob is not in the OFF position.
K The hood manufacturer accepts no liability for complaints that can be attributed to the design and layout of the
ductwork.

How to obtain service

For authorized service or parts information, call 1-800-735-4328.
We want you to be a satisfied customer. If a situation arises that has not been resolved to your satisfaction,
please let us know.
Write to: Customer Support, BSH Home Appliances, Corp. 1901 Main Street, Suite 600, Irvine, CA 92614, USA
or call: 1-800-735-4328.
Please include the model number, serial number, and date of original purchase/installation.

REPLACING THE BULBS

CUSTOMER SERVICE

3. Replace the halogen light bulb (conventional halogen
bulb, 12 volts, 20 watts max., G4 bulb socket).
IMPORTANT: Grasp bulb with a clean cloth before
inserting bulb into bulb socket.
4. Reattach the bulb ring.
5. Restore the power by plugging in the power cord or
switching on the fuse or circuit breaker.
Note: If the light does not work, make sure the bulbs have
been inserted correctly.
PAGE 7