Tyco DSC PowerSeries neo HS2ICONX Serie Instrucciones De Instalación página 5

Keypad Function Keys
Refer to your system installation manual for a complete list of available
function key options.
[00] - Null [13] - Global Away Arm
[02] - Instant Stay
[14] - Global Disarming [32] - Bypass Mode
Arm
[03] - Stay Arm [16] - [*][0] Quick Exit
[04] - Away Arm [17] - Arm Interior
[05] - [*][9] No-Entry [21] - [*][7][1]Command
Arm Output 1
[06] - [*][4] Chime [22] - [*][7][2]Command
ON/OFF Output 2
[07] - [*][6][----][4] [23] - [*][7][3]Command
System Test Output 3
[24] - [*][7][4]Command
[09] - Night Arm
Output 4
[12] - Global Stay [29] - Bypass Group
Arm Recall
[011] Keypad Input/Output Programming
Zone / PGM Number Default 000 |_____|_____|_____|
[012] Local PGM Output Pulse Activation Time
|_______|_______| Minutes (00-99) |_______|_______| Seconds (00-99)
[021] First Keypad Options
Default Opt. ON
ON |____| 1 Fire Key Enabled
ON |____| 2 Medical Key Enabled Medical Key Disabled
ON |____| 3 Panic Key Enabled
Display Access Code
ON |____| 4
When Programming
NOTE: For EN50131-1/EN50131-3 compliant systems, section [021],
options 1 and 2 shall be OFF.
[022] Second Keypad Options
Default
ON |____| 1
[31] - Local PGM Activ-
ate
OFF |____| 2
ON |____| 3
[33] - Bypass Recall
[34] - User Programming
ON |____| 4
OFF |____| 5
[35] - User Functions
ON |____| 6
[37] - Time & Date Pro-
gram
ON |____| 7
[39] - Trouble Display
OFF |____| 8
[40] - Alarm Memory
[023] Third Keypad Options
[61]-[68] - Partition
Select 1-8
Default
OFF |____| 1
ON |____| 2
OFF |____| 3
ON |____| 4
OFF OFF |____| 7
Fire Key Disabled
OFF |____| 8
Panic Key Disabled
[030] Downloaded LCD Message
Display Xs When Pro-
gramming Access
Codes
|_____|_____|_____|_____|_____|_____|_____|_____|_____|_____|_____|_____|_____|_____|_____|_____|
|_____|_____|_____|_____|_____|_____|_____|_____|_____|_____|_____|_____|_____|_____|_____|_____|
NOTE: Clock display (Section [022], Option 1) must be enabled.
Opt. ON OFF
Local Clock Display
Local Clock Display OFF
ON
Local Clock Displays
Clock Displays AM/PM
24-hr
Auto Alarm Mem Auto Alarm Mem Scroll
Scroll ON OFF
For Future Use For Future Use
Power LED Enabled Power LED Disabled
Power LED AC Present Power LED AC Present
ON OFF
Alarms Displayed Alarms Not Displayed
While Armed While Armed
Auto-Scroll Open Zones Auto-Scroll Open Zones
ON OFF
Opt. ON OFF
Armed LED Power Armed LED Off in Sleep
Save Mode
Keypad Status Shows Keypad Status Shows
Stay Arm Stay/Away Arm
5th Terminal is PGM
5th Terminal is Zone Input
Output
Prox Tag Will Arm/Dis- Prox Tag Does Not
arm Arm/Disarm
Local Display of Tem- No Local Display of Tem-
perature perature
Low Temperature Warn- Low Temperature Warning
ing Enabled Disabled
[031] Downloaded LCD Message Duration
Default: 000 |____|____|____| (Valid entries are 000-255, 000-
0=Unlimited Msg Display)
This number represents the number of times the downloaded message
must be cleared before it is permanently removed. This message can be
cleared by pressing any key.
[041] Indoor Temperature Zone Assignment
Default: 000 |_____|_____|_____| (Valid entries are 000-128)
[042] Outdoor Temperature Zone Assignment
Default: 000 |_____|_____|_____| (Valid entries are 000-128)
[101]-[228] Door Chime for Zones
Default: 01 |_____|_____|
The keypad can be programmed to make up to four different chime sounds
for individual zones.
(e.g., for Zone 1, enter section [101], for Zone 2 enter section [102]).
01 6 beeps 04 Alarm Tone (4s duration)
02 Bing bing tone 05 Zone Name
03 Ding dong tone
[991] Reset Keypad Programming to Factory
Defaults
1. Press [*][8][Installer Code].
2. Enter [991].
3. Use the [<][>] keys to scroll to the applicable keypad.
4. Press [*] to select the keypad.
5. Re-enter [Installer Code].
6. Press [*] to reset the selected keypad to factory defaults
Proximity (Prox) Tags Support
(HS2ICNP/HS2ICNRFP/HS2LCDP)
The proximity tag can perform any keypad function that would normally
require a user access code or to activate a programmable output. Present
the tag to the tag reader ( ) or to the left of the keypad LCD.
Assign Proximity Tags
Using an LCD keypad:
1. Press [*][5][Master/Supervisor Code].
2. Enter a 4-digit user code.
3. Press 2.
4. Pass the enrolled tag near the tag reader on the keypad.