Kohler K-1647 Guia Del Usuario página 3

Kit de control de vapor
Ocultar thumbs Ver también para K-1647:
Tabla de contenido

Publicidad

Idiomas disponibles

Idiomas disponibles

Operating Your Steam Generator
Steam Control Operation
NOTE: The clock is always displayed when the steam is not in use.
Push the "On/Off" button to start the steam.
When the button is pushed the green light on the "On/Off" button turns on. It remains on until the
unit is turned off. The display reads "On" for the first 3 minutes of operation if the settings are not
changed.
The current temperature is then displayed until the target temperature is reached.
Push the "On/Off" button again to stop the steam. The green light on the "On/Off" button turns off
and the display reads "Off" for 5 seconds, then returns to the clock.
NOTE: When turning the unit on, the steam duration and temperature settings will be based upon the
previous user settings. The settings of a new control unit are 113°F (45°C) for 15 minutes.
Steam Control Adjustment
Push the temperature button and the display flashes the previous setting. To adjust steam
temperature, press the increase button to increase the temperature and the decrease button to
decrease the temperature. The maximum allowed temperature is 125°F (52°C). The minimum
operating temperature is 90°F (32°C).
After 5 seconds, the flashing stops and ambient temperature is displayed as it changes to the target
temperature.
Push the timer button and the display flashes the previous setting. Press the increase or decrease
buttons to adjust the setting up or down. After 5 seconds the flashing stops and the timer setting is
displayed. If the increase or decrease buttons are not pushed the time will continue to count down.
The minimum operating time is 10 minutes, the maximum operating time is 20 minutes.
Push the clock button and the display flashes the current time of day setting. Press the increase or
decrease buttons to adjust the clock. After 5 seconds, the flashing stops and the set time is
displayed.
Press the "On/Off" button to stop the steam and exit at any time. The display will read "Off" for 5
seconds and default to the clock.
To toggle the temperature reading between Fahrenheit and Celsius, push and hold the temperature
button for 3 seconds.
Power Clean
Kohler Co.
Increase
Clock
Timer
3
Display
Decrease
On/Off
Temperature
1045789-5-H

Publicidad

Tabla de contenido
loading

Tabla de contenido