Vimar ELVOX RS11 Manual De Instalación Y Funcionamiento página 26

Tabla de contenido

Idiomas disponibles

Control input operating logic:

Dip 5

OFF

Logic description:

Condominium plus: when the gate is closed the APCH command controls opening, during the opening phase it is ignored. Once opening has completed

the gate is paused for the rest time. During the pause time an APCH command makes the automatic closing time restart from zero. During closing the APCH

command controls reopening.

Automatic: when the gate is closed the APCH command controls opening, during the opening phase it stops the gate and with an additional command the

gate closes. If it completes opening, the gate is paused for the rest time. During the pause time an APCH command makes the gate restart with closing.

During closing the APCH command controls reopening.

Condominium: with the gate closed an APCH input command controls opening, during gate opening the APCH command is ignored by the control unit, with

the gate fully open it stays open for the automatic closing time. With an APCH command during the pause the gate starts to close, an additional command

during closing controls reopening.

Semi-automatic: with the gate closed an APCH input command controls opening. During opening the APCH command stops the gate. When the gate is

fully open and automatic closing is not active, to close the gate before the automatic closing time you need to apply a command via the APCH input, another

APCH command during closing controls reopening.

Step-by-step: with the gate closed an APCH input command controls opening. During opening the APCH command stops the gate. When the gate is fully

open, automatic closing is not active, to close the gate you need to apply a command via the APCH input, another APCH command during closing stops the

gate and another pulse causes reopening.

Close immediately: engaging the photocells causes the gate to close 5 seconds after they are disengaged, regardless of the set rest time.

Dip 6

Dip 7

OFF