Use Of The Microscope Switching On The Microscope; B-20R / B-20Cr / M-100Fx; M-100Fled; Light Intensity Adjustment - Optika Italy ECOVISION Serie Manual De Instrucciones

8. Use of the microscope
8.1 Switching on the microscope

8.1.1 B-20R / B-20CR / M-100FX

1. Operate on the main switch ① placed in the rear
side of the microscope, moving the selector on
"I". (Fig. 4)

8.1.2 M-100FLed

1. Operate on the main switch ② placed in front of
the microscope. (Fig. 5)
8.2

Light intensity adjustment

8.2.1 M-100FX

• No light intensity adjustment can be done on this
model.
8.2.2 B-20R / B-20CR / M-100FX
1. Turn the light intensity dial ③ placed on the right
side of the microscope. (Fig. 6)
8.2.3 M-100FLed
1. Operate on the main switch ② placed in front of
the microscope. (Fig. 5)
①
Page 9
F ig. 4 F ig. 4
②
F ig. 5 F ig. 5
③
F ig. 6 F ig. 6