Assembling; Use Of The Microscope; Placing The Specimen; Turning On The Light - Optika Italy SFX Serie Manual De Instrucciones

8.

Assembling

No installation procedure is required for these models.
The only thing you need to do is to connect the power supply (or power cable) to the microscope and the wall socket.
9.

Use of the microscope

9.1

Placing the specimen

Place the specimen on the microscope stage and lock the
specimen using the slide-clamp if it is necessary.
• Ensure that the specimen is centered over the stage opening.
(Fig.1)
9.2

Turning on the light

• The microscope comes with an electrical illuminator.
1. Insert the plug of the cable into the power socket (or the
power supply jack in the socket).
2. Turn on the switch on the main body and select your light
source. (Fig. 2A-2B)
For SFX models, repeatedly press the touch button in order to
change the light intensity.
• Depending on the model, the light intensity can be adjusted
with a knob on the right side of the stand. (Fig. 3)
Page 16
A A
F ig. 1 F ig. 1
F ig. 2 F ig. 2
B B
F ig. 3 F ig. 3