Installation Of The Control Unit In The Front Cover Of The Bottom Kitchen Cabinet; Installation - bora PC 32-000 Instrucciones De Montaje Y De Uso

... Installation

Installation of the control unit in the front cover of the bottom kitchen
cabinet
upper side of worktop
worktop
cover
The four bores for the control unit must be made at the centre of the
cooktop.
Install a cable protection shelf below the control unit. Provide an
opening for the power mains cable at the rear of the cut-out.
Please note that it is not possible to install under-counter appliances below
the cooktop or the control unit.
Installation
■ The use of solid timber wall strips behind the built-in cooktop on the worktop is
permissible, provided the required minimum distances are maintained.
■ The use of plastic wall strips is not permissible.
■ Changes in the surface colour normally result from the effect of light.
37 90
37
9