Technical Specifications - Holmatro PSP40 Manual

/i
1 Dust cap
2 On-tool charge connector
3 Deadman's handle
4 Tool temperature indicator
5 Maximum force indicator
6 Light switch for LEDs
7 Battery pack fitting / adapter fitting
8 Carrying handle
9 LEDs
10 Battery pack
11 Battery temperature indicator
12 On/off switch
3.4 User interface of the tool
/i
1. on/off switch for
LEDs in carrying
handle.
2. Maximum force
reached when green.
3. Temperature of the
tool.
3.5

Technical specifications

/i
Description
max. working pressure
hydraulic oil type
vibration level
protection rate
sound emission @ 1m/3.25ft dB(A)
sound emission @ 4m/13ft
temperature range
directives
1. The tool and battery pack can be put fully into in fresh water at a
maximum depth of 1 meter for 30 minutes.
/i
Description
spreading distance
PSP40
User interface Color Condition
Unit
(bar/MPa)
psi
-
m/s²
-
dB(A)
°C
°F
- 2006/42/EC, 2014/30/EU
Unit
mm
in
916.400.097_002
13 State Of Charge (SOC) indicator (see section 3.6.2)
14 Battery pack lock
15 Snap ring
16 Snap ring
17 Yoke
18 Protection hood
19 Hinge pin
20 Hinge pin
21 Spreading arm
22 Lock pin
23 Spreading tip
Color: red, flashing
The tool is too hot.
Color: red
The tool is almost too
hot.
Color: green
The temperature is ok.
General
720 / 72
10443
ISO-L HV VG 36
< 2,5
1
IP57
76
67
-20 + 55
-4 + 131
PSP40
725
28.5
Action / Solution
Stop the tool.
Cool down the tool.
Slow down the operation.
Normal operation
EN
39