On/Off Switch - Holmatro PSP40 Manual

3.6.2 LEDs for State Of Charge indication
The battery pack has a LED indicator that indicates the approximate state of charge of the battery.
NOTE
The state of health of the battery pack is displayed on the charger.
Each LED accounts for approximately 20% of the full charge.
/i
Tool OFF,
All LEDs:
off
Error.
all LEDs:
1
red, flashing
1. When all LEDs are red and flashing:
1. Push the on/off switch to stop the battery.
2. Push the on/off switch to start the battery.
3. Charge the battery 24 hours.
4. If this condition stays, contact a Holmatro Certified Technician.
3.6.3

On/off switch

/i
Push this button to start the tool. Push this button again to stop the tool.
The motor of the tool is energized when the deadman's handle is operated.
NOTE
When the tool is started, the LEDs of the carrying handle come on by default.
3.6.4 Temperature of the battery pack
The Battery Management System (BMS) protects the battery pack against internal damage.
PSP40
Battery discharging
color:
80-100%
green
color:
60-80%
green
color:
40-60%
green
color:
20-40%
orange
color:
10-20%
red
color:
<10%
red, flashing
0%
Battery on / connected with charger.
Battery not charging
color: green
916.400.097_002
Battery charging
color: green
100%
80-100%
60-80%
40-60%
20-40%
0-20%
EN
100%
80-100%
60-80%
40-60%
20-40%
0-20%
41