Serial Number Plate Location; Early Production; Late Production - E-Z-GO FREEDOM Manual Del Propietário

Read all of manual to become thoroughly familiar with this vehicle. Pay particular attention to all Notes, Cautions and Warnings

SERIAL NUMBER PLATE LOCATION

Early Production

The serial number and manufacture date code are located
on a plate on the passenger side of the dash housing of the
vehicle (Ref. Fig. 15 on page 11).
Design changes take place on an ongoing basis. In order to
obtain correct components for the vehicle, the manufacture
date code, serial number and vehicle model must be
provided when ordering service parts.
Ref Spl 1
Fig. 15 Serial Number Plate Location - Early
Production
To
maintenance items must be serviced
more frequently on vehicles used under
severe driving conditions such as extreme temperatures, extreme
dust/debris conditions, frequent use with maximum load.
To access powertrain for routine maintenance, lift or remove
seat. For major repair, refer to appropriate Technician's
Repair and Service Manual.
Some service procedures may require the vehicle to be
lifted. Refer to LIFTING THE VEHICLE for proper lifting
procedure and safety information.

Late Production

Two serial number and manufacture date code plates are on
the vehicle. One is placed on the body below the front,
driver side of the seat. The other is located on the chassis
between the seat back supports. To access it, raise the seat
and lift up the flap on the access panel (Ref. Fig. 16 on page
11).
Design changes take place on an ongoing basis. In order to
obtain correct components for the vehicle, the manufacture
date code, serial number and vehicle model must be
provided when ordering service parts.
To
maintenance items must be serviced
more frequently on vehicles used under
severe driving conditions such as extreme temperatures, extreme
dust/debris conditions, frequent use with maximum load.
OPERATION AND SERVICE INFORMATION
prolong vehicle life,
prolong vehicle life,
Owner's Manual and Service Guide
Serial Number
Labels
Ref Spl 3
Fig. 16 Serial Number Plate Location - Late
To access powertrain for routine maintenance, lift or remove
some
seat. For major repair, refer to appropriate Technician's
Repair and Service Manual.
Some service procedures may require the vehicle to be
lifted. Refer to LIFTING THE VEHICLE for proper lifting
procedure and safety information.
some
Lift Flap on Access Panel
Production
Page 11