Care And Cleaning - Kohler K-5031 Guía De Instalación Y Cuidado

Sleeve
Screw
Cap
7. Install the Shroud
Insert a sleeve into each of the shroud mounting holes.
Secure the shroud by threading the screws into the brackets.
Install a cap to the head of each screw.

Care and Cleaning

For best results, keep the following in mind when caring for your
KOHLER product:
• Always test your cleaning solution on an inconspicuous area
before applying to the entire surface.
• Wipe surfaces clean and rinse completely with water immediately
after applying cleaner. Rinse and dry any overspray that lands on
nearby surfaces.
• Do not allow cleaners to soak on surfaces.
• Use a soft, dampened sponge or cloth. Never use an abrasive
material such as a brush or scouring pad to clean surfaces.
• Be careful not to leave staining materials in contact with the
surface for extended periods of time.
• The ideal cleaning technique is to rinse thoroughly and blot dry
any water from the surface after each use.
Kohler Co.
Shroud
11 1293762-2-A