Kohler K-5031 Guía De Instalación Y Cuidado página 7

Lag Bolt Holes for
K-5026/K-5148
Hanger Bolt
3. Install the Mounting Hardware
For K-5026 / K-5148:
Using the appropriate sized drill bit for the lag bolts (not
provided), drill pilot holes at the two outermost marked locations.
Using a 10 mm drill bit, drill pilot holes at the remaining four
marked locations.
Install the anchors and hanger bolts in the two innermost holes.
For K-5027 / K5150:
Using a 10 mm drill bit, drill pilot holes at the four marked
locations.
Install the hanger bolts and anchors for the brackets.
Secure the brackets with the washers and bolts.
Kohler Co.
10 mm
Drill Bit
Anchor
Hanger Bolt
Anchor
Bracket
Washer
Bolt
7 1293762-2-A