Installation Check - Toto Lloyd LF930WCPN Manual De Instalación

• Make sure the top of the panels are level.
• Measure the diagonals by making sure they are same for squareness.
• Mark screw location for installation.
Equal Diagonal
Dimension
Tape the cushion band on
top edge of the 3 panels
Peel off the cushion tape and drop in the lavatory into the console.
Make sure that the vanity is level and firmly attached to the wall and floor. Also make sure there are no loose screws.
To clean the product, wipe it down using a damp cloth. Only use a diluted netural detergent for stubborn stains. Refer
to the owner's manual for detailed cleaning instructions.
6. INSTALL TO WALL
Wall Screws
2
7
- 1
/ 8
"
( 6
Anchor - as needed
Ø 5/16" (8mm)
8. CUSHION TAPE
8. INSTALL THE LAVATORY

INSTALLATION CHECK

9
0
m
m
)
Level
2
7
- 1
/ 8
"
( 6
9
0
m
m
)
Lavatory
5