Handle Installation - Amana ATB1504ARW Guía De Uso Y Cuidado

Tabla de contenido

Publicidad

Idiomas disponibles

Idiomas disponibles

Installation

Handle Installation

Tools Required:
• Phillips screwdriver
Fresh Food Door Handle:
1. Align handle with mounting stud in door.
2. Pull handle down.
3. Secure handle with two screws.
3
2
1
5
Freezer Door Handle:
1. Holding the handle at an angle align it with the
mounting stud on the door.
2. Pull the handle down at an angle and rotate it so
the holes in the bottom of the handle line up with
the holes in the bottom of the freezer door.
3. Secure handle with two screws.
4. Reverse the procedure to remove handle if
necessary.
2
1
3
5. If desired, the handles can
be mounted on the
opposite side, so the door
would open to the left
rather the right. To remove
the handles reverse the
above steps. Flip the
handles 180 degrees and
mount them on the
opposite doors.

Publicidad

Tabla de contenido
loading

Tabla de contenido