Accessory Parts - Maruyama Mist Duster MD 830 Manual Del Propietario Y Operador

Models
Dimensions L x W x H
Dry Weight
Engine Type
Displacement
Ignition System
Carburetor
Chemical Tank Capacity
Fuel Tank Capacity
Fuel Mixture
Attachiments (Standard)
SERIAL NIMBER
The MARUYAMA MIST DUSTER comes with an Owner's / Operator's Manual and a Warranty
Registration Card. Assembly and attachment of the throttle lever bracket and blower pipes are
required.
ASSEMBLY INSTRUCTIONS
STEP #1) Locate and identify all the components (see sketch).
SWIVEL STRAIGHT
FLEXIBLE
PIPE PIPE
PIPE
STEP #2) Using the BANDS, connect the FLEXIBLE PIPE to the blower, and the SWIVEL PIPE to
the flexible pipe (see sketch).
STEP #3) Assemble the STRAIGHT PIPE, BENT PIPE, and FAN-BLOW HEAD, then connect them
to the swivel pipe (see sketch).
STEP #4) Slide handle over swivel pipe and tighten retainer knob. (see sketch).
STEP #5) Connect the Mist hose to the Mist cock and Mist pipe. (see sketch)
MIST DEFLECTOR CAP
ONE WAY TYPE
DEFRECTOR CAP
English
SPECIFICATIONS
Kawasaki/2-Stroke Air cooled TK65 for EPA
Using MARUYAMA 50:1 2-cycle Engine Oil or any quality 2-cycle engine oil
designed for use in air-cooled, high performance 2-cycle engines.
Flexible Pipe, Swivel Pipe Straight Pipe, Mist Pipe
At the Rated Operation (Engine Rotational Speed : 6350 mn-1)
Vibration Value :3.87 m/s
Noise emissions Sound power level, measured, dB(A) 108
Sound power level, guaranteed, LWAG dB(A) 109
Safety Inclination Degree is within 10°.
BANDS(S) BANDS(S)
3.2 in.
4.0 in.
MIST PIPE
BOX SPANNER

ACCESSORY PARTS

DUAL TYPE
MIST PIPE
— 7 —
MD830
410 x 475 x 720 mm
11.7 kg
64.7 cc
Electric
All position diaphragm
30 lit
2 lit
50:1
2 (Shoulder Bearing Part)
OWNER'S/
OPERATOR'S
HOSE BAND
MANUAL
HOSE CLAMP X 2 HOSE ASSY
DEFRECTOR CAP
WARRANTY
REGISTRATION CARD
MIST PIPE