Hansgrohe AXOR Starck 408711 Serie Instrucciones De Instalación/Garantía página 6

1
IN: 110 V /
70 - 170 mA
OUT: 1 V DC /
500 mA
2
3
6
– +

1
English
max. 21 ft.
Cut the electrical power to the
installation point at the circuit
breaker.
Install the transformer in the wall in an electri-
cal box. It must be in a safe, dry, accessible
location.
Connect the load and neutral wires to the
transformer.
Connect the grounding wire to the grounding
lug on the electrical box, if so equipped.
Be sure that no bare wire is visible after mak-
ing the connections.
Connect the transformer cable (included) to
the transformer. The red wire is positive (+),
the black is negative (–).