Publicidad
Idiomas disponibles
Idiomas disponibles
- Do not use the appliance if its accessories are
not properly fitted.
- Do not use the appliance if the accessories or
consumables attached to it are defective. Replace
them immediately.
- Disconnect the appliance from the mains when
not in use and before undertaking any cleaning
task.
- This appliance is for household use only, not
professional, industrial use.
CAUTION: Do not leave the appliance unattended
during use as there is a risk of an accident.
- Do not touch the heated parts of the appliance,
as it may cause serious burns.
- This appliance is only for domestic use, not for
industrial or professional use. It is not intended to
be used by guests in hospitality environments such
as bed and breakfast, hotels, motels, and other
types of residential environments, even in farm
houses, areas of the kitchen staff in shops, offices
and other work environments.
- This appliance is not intended for use by persons
(including children) with reduced physical, sensory
or mental capabilities, or lack of experience and
knowledge, unless they have been given supervi-
sion or instruction concerning use of the appliance
by a person responsible for their safety.
- This appliance is not a toy. Children should be
supervised to ensure that they do not play with the
appliance.
- This appliance is not a toy. Children should be
supervised to ensure that they do not play with the
appliance.
- Do not expose the appliance to extreme tempera-
tures.
- Do not expose to extreme temperatures or strong
magnetism.
- Keep the appliance in a dry, dust-free place, out
of direct sunlight.
- Always check the workpiece before operation and
remove any obstructions such as nails, staples,
screws, string, rags, cloths and other debris.
- Only use the appliance for carrying out dry tasks.
- Do not use the appliance on any part of the body
of a person or animal.
- Let the appliance running with no load for 30
seconds in a safe position. If you notice serious
vibration or other defects stop the appliance imme-
diately. Then check the problem and /or proceed
as we describe on Anomalies and Repair clause.
- The appliance can be used on surfaces such as:
wood, cardboard, plastic, plaster, etc.
Product description and Specifications
DESCRIPTION
ID600REP_IM.indd 6
A. Variable speed button
B. Start-up switch
C. Locking button
D. Rotation direction switch
E. Drilling/Impact drilling selector
F. Drill chuck
G. Auxiliary handle
H. Depth Stop
I. Chuck Key
J. Cooling vents
K. 1PC 3M Steel Measuring Tape
L. 1PC 18mm Aluminium-Alloy Cutter
M. 1PC Slotted Screwdriver 6x150mm
N. 1PC Phillips Screwdriver 6x150mm
O. 5PCs Masonry Drill Bits:
3 - 4 - 5 - 6 - 7mm
P. 5PCs Wood Twisted Drill Bips:
3 - 4 - 5 - 6 - 7mm
Q. 5PCs Twisted Drill Bits:
3 - 4 - 5 - 6 - 7mm
R. 1PC 8oz Claw Hamer
S. 20PCs Screwdriver Bit Set (25mm):
3 - 3 - 4 - 4 - 5 - 5 - 6 - 6 - 7 - 7
PH0 - PH1 - PH2 - PH2 - PH3
PZ0 - PZ1 - PZ2 - PZ2 - PZ3
T. 1PC 60mm Holder
U. 8PCs Hex Key Wrench:
1.5 - 2 - 2.5 - 3 - 4 - 5 - 5.5 - 6mm
V. 1PC 6" Cr-V Combination Pliers
If the model of your appliance does not have the
accessories described above, they can also be
bought separately from the Technical Assistance
Service.
Instructions for use
Before use:
- Make sure that all the product's packaging has
been removed.
- Ensure that the voltage indicated on the rating
label matches the mains voltage before plugging in
the appliance.
- Before using this product for the first time, it is
important to make a full charge of batteries.
- Prepare the appliance according to the function
you wish to use:
AUXILIARI OPERATION
- When working always use the auxiliary handle (G)
- The drilling depth can be set according to your
needs. Push the depth stopper until it marks the
depth you need to drill. The best way is to make a
drilling first and adjust the depth stopper.
INSERTING A BIT
2019-03-29 01:40:07 PM
Publicidad
