Temperature Display - Bresser ClimaTemp FSX Manual De Instrucciones

5. Press the CH/UP button on the base station several
times to display the measured values for the individual
channels. The selected channel is shown in the display.
• one wireless sensor included, others optionally available

19 Temperature display

Press the °C/°F button to switch between the temperature
display in °C or °F.
When temperatures of -40°C or below and humidity of 20%
or below are reached, the information "LO" is output for the
respective range.
At temperatures of 70°C or higher and a humidity of 90% or
higher, the information "HI" is displayed.
For values outside the measurable range "- -" is displayed.
When returning to a measurable temperature range, the
corresponding temperature is displayed again.
20 History record for the past 24
hours
The base station automatically records air pressure read-
ings from the last 24 hours.
If necessary, press the HISTORY button several times to
display the history data for the hourly values (HOUR - up to
24 hours backwards) for the pressure one after the other.
When a history date is displayed, press any key (except
HISTORY) to return to the normal display mode.
19 / 108